Manifold 58
58 | DN: max 5 (8) PN max. 420 (6000psi) T max 250°C |
This manifold is only for zero-point / equalization of an differential pressure gauge. The connections and the connection-measures can be adjusted to the differential pressure gauge. |
parts list
part no. | designation | material | |
---|---|---|---|
1 | 2 | ||
1 | body | A105 | 316Ti |
2 | seat interchangeable | 430F | 316Ti |
3 | Sspindle roll sealed | 430F | 316Ti |
3.1 | cone, rolled into, movable | SS | 316Ti |
4 | screwed bonnet housing | 1035 | 316Ti |
5 | scraper ring | Novapress | |
6 | packing | graphit1) | PTFE2) |
7 | gland | 1213 | 316Ti |
8 | union nut | 1213 | 316Ti |
13 | seal | mild steel | 316Ti |
1) On request: ptfe-packing; max 200°C for all fittings or
2) free of oil and grease: oxygen packing max. PN 250
Diese Darstellung zeigt beispiels- weise den Ventilblock mit Ein- gangs-, Ausgangs- und Testan- schluß mit Innengewinde
1/2” NPT. Optional sind Laschen, Befesti- gungsgewinde und die Verschluß- schraube. (Andere Anschlüsse und Erklärun- gen s. Seite V25)
scale
This picture shows e.g. the manifold with inlet-, and blow out connec- tion cutting-ring for 12mm tube. The outlet is flangeable EN 61518.
Order no. for this example: V58?SV12FLSV12
|
|
7/16 UNFx2" oder M 10x50 oder M 12x50 nach DIN 931 |
seals PN 1-100:PTFE PN101-400: Viton® |
||
4 screws 7/16“ UNF x2 1/4“ steel zinc-coated and 2 gaskets belong to the manifold |
|
Order Number
V | 58 | FL | h | |||
type | body number | material code | inlet-code | outlet-code | test-/ blow out connection code | special characters code |
V=manifold | 1 Mat.: carbon steel A105 2 Mat.: stainless steel 316Ti |
h if proofconnections are on transmitter side |
A external spindle thread F bellow PT german TA-Luft |