Manifold 36
36 | DN: max 5 (8) PN max. 420 (6000psi) T max 250°C |
This 3 valve manifold is designed for remote mounting to a transmitter. It has two blockvalves (+ and - lines) and an equaliser valve. The manifold could have optional proof- and / or blow out connections. |
parts list
part no. | designation | material | |
---|---|---|---|
1 | 2 | ||
1 | body | A105 | 316Ti |
2 | seat interchangeable | 430F | 316Ti |
3 | spindle roll sealed | 430F | 316Ti |
3.1 | cone, rolled into, movable | SS | 316Ti |
4 | screwed bonnet housing | 1035 | 316Ti |
5 | scraper ring | Novapress | |
6 | packing | graphite1) | PTFE2) |
7 | gland | 1213 | 316Ti |
8 | union nut | 1213 | 316Ti |
9 | handwheel | moulded plastic3) | |
10 | nut | galvanized steel | SS |
13 | seal | mild steel | 316Ti |
1) On request: ptfe-packing; max 200°C for all fittings or
2) free of oil and grease: oxygen packing max. PN 250
3) On request: steel sheet or tommy bar.
Diese Darstellung zeigt beispiels- weise den Ventilblock mit Ein- gangs-, Ausgangs- und Testan- schluß mit Innengewinde
1/2” NPT. Optional sind Laschen, Befesti- gungsgewinde und die Verschluß- schraube. (Andere Anschlüsse und Erklärun- gen s. Seite V25)
scale This picture shows e.g. the manifold with inlet-connection cutting-ring for 12mm tube. The outlet ist flangeable EN 61518. Optional are fastening female thread, T-bar key, blowout- and / or testconnection (shown: welded stud with M20x1,5 thread).
Order no. for this example: V36?SV12FLP1B |
|
7/16 UNFx2" oder M 10x50 oder M 12x50 nach DIN 931 |
seals PN 1-100:PTFE PN101-400: Viton® |
||
4 screws 7/16“ UNF x2“ steel zinc-coated and 2 gaskets belong to the manifold |
|
Order Number
V | 36 | FL | ||||
type | body number | material code | inlet-code | outlet-code | test-/ blow out connection code | special characters code |
V=manifold | 1 Mat.: carbon steel A105 2 Mat.: stainless steel 316Ti |
P6 G3/8“ evtl. mit Verschlußschraube P7 1/2-14 NPT evtl. mit Verschlußschraube P8 1/4-18 NPT evtl. mit Verschlußschraube P1 Eingeschraubter Stutzen mit M20x1,5 Außen- gewinde mit Verschlußkappe DIN 16287 Form D Q5 1/4“ mit Verschlußschraube Q6 G3/8“ mit Verschlußschraube Q7 1/2-14 NPT mit Verschlußschraube Q8 1/4-18 NPT mit Verschlußschraube |
A external spindle thread B fastening female thread F bellow G bar (instead of handwheel) H handwheel of steel sheet PT german TA-Luft S T-bar key |